1.
Extruded rubber seals in standard, unique sizes.
Extruded rubber seals are made by forcing the uncured elastomer through a die while it is under heat and pressure. This uncured material is then heated to ...
2.
Extruded rubber seals in standard, unique sizes.
Extruded rubber seals are made by forcing the uncured elastomer through a die while it is under heat and ... Centennial, Colorado 80112 (303) 758-2728 ...
3.
Anti-extrusion ring prevents elastomer extrusion.
An anti-extrusion ring is a thin ring installed on the low pressure side of a seal to prevent elastomer ... Centennial, Colorado 80112 (303) 758-2728 ...
4.
Extruded rubber seals in standard, unique sizes.
Extruded rubber seals are made by forcing the uncured elastomer through a die while it is under heat and pressure. This uncured material is then heated to ...
5.
Single, double acting piston cups, o-rings, seals.
A multi-lip seal set consisting of top and bottom adaptors, and a number of Vee rings to provide the sealing surfaces. Generally used as valve stem packing, ...
6.
Material selection chart for oil seals.
Oil seals: Chart gives the properties of common elastomers that are resistant to petroleum oils.
7.
Oil seal basics: how o-rings, seals are designed.
In an oil seal environment there is a shaft that is rotating inside a housing or bore. Because of friction, there must be some clearance between the shaft ...
8.
Material selection chart for oil seals.
Oil seals: Chart gives the properties of common elastomers that are ... -56°C to 204°C, A fluorosilicone oil seal combines the good high and low temperature ...
9.
Outgassing in elastomers; we solve o-ring problems
Specific values for vacuum weight loss are dependent on the elastomer and sample conditioning. Heating an o-ring seal for several hours at 100°C has been ...
10.
Japanese Industrial Standard (JIS) B 2401 O-rings
Japanese Industrial Standard (JIS) B 2401 O-rings. Chart of o-ring material specifications.
