1.
Home Metal Shop Club, April 1997
Making an expanding arbor is simple. It takes advantage of the tapered nature of pipe threads. Photo of arbor and collet One of the arbors is shown on the ...
2.
Newsletter
File Format: PDF/Adobe Acrobat - View as HTML problem since the plate was too big for my Bridgeport, so I rented a Magnetic Drill Press from a local tool rental place. The machine was much larger than I ...
3.
Volume 9, No 9- September 2004
You can statically balance vitrified grinding wheels for both your surface and pedestal grinders with a few common shop tools. Don't worry about dynamic ...
4.
Volume 9, No 9- September 2004
You can statically balance vitrified grinding wheels for both your surface and pedestal grinders with a few common shop tools. Don't worry about dynamic ...
5.
Volume 8, No 9 - OCt, 2003
The right photo shows a ball turning attachment that rotates about the horizontal axis that is perpendicular to the lathe's axis. ...
6.
Quick Change Toolpost for Small Lathes
I designed and built this tool post for a 9x19 Grizzly lathe I had about 8 years ago. This is the same lathe as several suppliers such as Jet and Enco sells ...
7.
Volume 8, No 9 - OCt, 2003
The Sept. meeting featured the various kinds of lathe radius attachments used by .... Remember to bring your FLY CUTTERs to the next meeting's tool roundup! ...
8.
Stand for bandsaw
The Bandsaw Project. Stand for 4x6 Horizontal/Vertical Bandsaws ... The nozzle for the coolant will vary from saw to saw because the structure of the saw ...
9.
aug99
Feature presentation - Tom Moore presented his Universal Pillar Tool, which was made from a casting set designed by George Thomas. Two accessory racks were ...
10.
aug99
It is called Indexer LPT. It is the least inexpensive indexer of which I am aware. Computers can have up to 3 parallel ports. Each port drives 2 stepmotors. ...