1.
Orthogonal Frequency Division Multiplexing
Orthogonal Frequency Division Multiplexing. In OFDM the subcarrier pulse used for transmission is chosen to be rectangular. This has the advantage that the ...
2.
OFDM and the orthogonality principle
OFDM and the orthogonality principle. ... Single carrier approach · Multi carrier approach · Orthogonal Frequency Division Multiplexing.
3.
Job offer: Architecture Design Group
Major research areas include multi-processor system-on-chip (MPSoC) architectures, compilers for embedded processors, and architecture optimization for ...
4.
FRIDGE - Fixed-point pRogrammIng DesiGn Environment
On the other hand, fixed-point system design requires a specific design flow, ... As soon as all operands are specified as fixed-point data types, HYBRIS ...
5.
Capacity of MIMO Channels with Data-Aided Channel Estimation
Capacity of MIMO Channels with Data-Aided Channel Estimation. Abstract .the amount of pilot information needed pilot symbols are transmitted, the channel ...
6.
An OFDM receiver for DVB-T
An OFDM receiver for DVB-T. ... Previous: Orthogonal Frequency Division Multiplexing Next: Tasks of the inner receiver and receiver structure Up: OFDM ...
7.
3 .Ubung zu “Compilerbau 2”, WS 08/09
- [ Translate this page ]File Format: PDF/Adobe Acrobat - View as HTML ‘‘mac"’ Kosten=2 reg1 -> +(*(reg1, reg2),MEM). ‘‘mov"’ Kosten=1 reg1-3 -> reg1-3. ‘‘load"’ Kosten=1 reg2 -> MEM. Fur folgenden Baum soll nun mittels diese
8.
SystemC Based Design of an IP Forwarding Chip with CoCentric ...
File Format: PDF/Adobe Acrobat CoCentric System Studio (CCSS) and applied to the development of a 2.5 GB ..... CoCentric System Studio serves as integrated SystemC design environment for ...
9.
Channel estimation for OFDM
Channel estimation for OFDM. The method of channel estimation implied by the frame structure of DVB-T is channel estimation via interpolation. ...
10.
Orthogonal Frequency Division Multiplexing
Orthogonal Frequency Division Multiplexing. In OFDM the subcarrier pulse used for transmission is chosen to be rectangular. This has the advantage that the ...