1.
Tools and Tips - How Herm does things
I have to laugh sometimes at the lengths some people (primarily vendors) will go to in portraying the sharpening of lathe chisels as a mystery and a skill ...
2.
Tools and Tips - How Herm does things
The lathe was made 35 years earlier by an aircraft machinist and never turned a .... tool-specific wedges for sharpening - in this case for a disk tool. ...
3.
Making your own Fibre Optic Light
This light simply uses a halogen lamp from Home Depot, a box made of ¾” plywood, two 10 foot lengths of 30 strand fibre optic cable from a local swimming ...
4.
Herm's Midi Music
I got into MIDI because I needed an accompanist. I had married my accompanist in university, and we were together for 16 years. When we were divorced, ...
5.
Tools and Tips - How Herm does things
I explained what I used to sharpen my chisels and was surprise to get some .... The rotating wood in the lathe powers it, and as it spins it sands on two ...
6.
Woodturning, Woodworking and Music with Herman de Vries
Galleries and comments on turnings back to 1997, and a page on tools and tips.
7.
Woodturning, Woodworking and Music with Herman de Vries
Galleries and comments on turnings back to 1997, and a page on tools and tips.
8.
Herm's Midi Music
All the music here is re-arranged in General Midi format using the Sound Blaster ... My Tribute. This gospel song by Andre Crouch, arranged by Tom Fetke, ...
9.
Woodturning, Woodworking and Music with Herman de Vries
Galleries and comments on turnings back to 1997, and a page on tools and tips.
10.
Making your own Fibre Optic Light
A simple fibre optic light is easy to make. This light simply uses a halogen lamp from Home Depot, a box made of ¾” plywood, two 10 foot lengths of 30 ...
