1.
DOWEL PINS(PACKING SALES)/DOWEL PIN EXTRACTORS
File Format: PDF/Adobe Acrobat - View as HTML Rotate the extractor's knurled shaft and attach the screw. 4.Slide the hammer and extract the dowel pin. 1.Insert a socket head cap screw into a holder cap. ...
2.
MISUMI News & Views
File Format: PDF/Adobe Acrobat - View as HTML Xenon Automatisierungstechnik GmbH (www.xenon-dresden.de). The year is gradually nearing its end.The industry has experienced a very successful year and the ...
3.
MISUMI Europe - Catalogue Press Dies
BALL-LOCK PUNCHES-Economy type- -Light load type- -Heavy load type-, 789-790, [VIEW]. BALL-LOCK JECTOR ... BALL-LOCK JECTOR PUNCHES-With groove for spanner- ...
4.
RECYCLE MARKED PINS FOR IDENTIFICATION OF PLASTIC PACKAGING
Make a hole(H7)on the plate and lightly drive the recycle marked pin into it using a wood hammer, etc. Then adjust the marking position and fix with a bolt. ...
5.
GUIDE FOR TENSION LINKS
File Format: PDF/Adobe Acrobat - View as HTML When flat type tension link is used, head section of the retainer ... ¡Sliding parts of the tension links have 1mm clearance so that the mold can be ...
6.
Technical Data
File Format: PDF/Adobe Acrobat - View as HTML Centerline average roughness (Ra75) is defined in the supplements to JIS B 0031 and JIS B 0601.» Levels of the highest peak to the fifth highest peak in the ...
7.
DRAWING BUTTON DIES / KNOCKOUT PINS
CUse as a knockout pin for a drawing die(P.541). CThe collar diameter is a dimension that makes it possible to insert it in the relief hole in the drawing ...
8.
MISUMI Europe - Catalogue Plastic Mold
Locking Blocks / Side setting type / Bolt hole / Tap hole, 737-738, [VIEW]. Inlay / PL setting type / Locking Blocks with Angular Hole Process / For PL ...
9.
UNI-JOINT PLUGS - HYDRO-CIRCUIT BLOCKS
File Format: PDF/Adobe Acrobat - View as HTML other information, refer to. Main frame Polyacetal resin. Tubes Urethane. Screw section Brass(C3604). UNI-JOINT PLUGS. HYDRO-CIRCUIT BLOCKS ...
10.
Technical Data
File Format: PDF/Adobe Acrobat - View as HTML Machining Method. Ra Value. Fig.1 Positions of Auxiliary Symbols. 1. Positions of Auxiliary Symbols for Surface Symbol. GRa: The evaluation values of Ry and ...
