1.
Resistoflex: PP Lined Fittings Specs
Covers are SAE 1010-1030 steel. 5. FITTING REQUIREMENTS - FABRICATED CARBON STEEL: ... Reducing filler flange is ASTM A516 GR 70 or SAE 1010-1030 steel. ...
2.
Resistoflex: PP Lined Fittings Specs
Covers are SAE 1010-1030 steel. 5. FITTING REQUIREMENTS - FABRICATED CARBON STEEL: ... Reducing filler flange is ASTM A516 GR 70 or SAE 1010-1030 steel. ...
3.
Resistoflex: Sulfuric Acid
One of the more common operations in handling sulfuric acid in lined piping is dilution to a lower strength acid. This is usually done with a mixing tee. ...
4.
Resistoflex: CONQUEST PTFE Fabrication Procedures
NOTE 1: THE 25# FORCE SHOULD BE ACHIEVED JUST AFTER THE PTFE GEL TURNS WHITE. NOTE 2: EXCESSIVE WELD FORCES WILL CAUSE THE LINER TO BUCKLE, ...
5.
Resistoflex: Check Valves
Resistoflex Horizontal and Vertical Poppet-Type Check Valves are ... The poppet-type design of the vertical check valves eliminates problems that occur in ...
6.
Resistoflex: Check Valve Dimensions
Vertical Check Valve Dimensions (All dimensions in inches) ... DI 150 Polypropylene (PP) Vertical Check Valve Part Numbers. Diameter ...
7.
Resistoflex: Expansion Joints
The use of the "Expansion Joint of TEFLON® Application Guide" should be used in ... All expansion joints of TEFLON® should require a safety shield or wrap. ...
8.
Resistoflex: Saran
Recommended Bolt Torques for Lightly Oiled A193 B7 Bolts with A194 2H Nuts for Class 150 (PVDC) Saran® Lined Steel Piping. ...
9.
Resistoflex: Hydrobromic Acid
Typical properties of commercial hydrobromic acid. 48% HBr, 62% HBr. Specific gravity, 1487 (25°C) (77°F), 1723 (25°C) (77°F). Density (lb/gal), 12.5 ...
10.
Resistoflex: Chlorine Liquid Cl2
... primarily sodium chloride, from which it is electrolytically extracted from ... Liquid chlorine is a clear amber fluid with a density approximately 1.5 ...
